STARTFUNCT.
1
2
3
4
R
G
STOP
S1 S2
S3
BACK-UP UNIT
(with PAIR 2.0)
Information provided in this manual is used for the installation of the radio remote con-
trol on the machine and for its maintenance.
Information provided in this manual allows to disable, enable and set some radio remote
control's functions that may have impacts on the risk assessment related to the radio
remote control.
Information provided in this manual cannot be used and performed by people who are
not competent and responsible for this matter.
Those who use this information must have been trained about the radio remote control
and its risks by Autec's personnell or by people authorized by Autec.
Autec srl cannot be held liable for responsibilities resulting from the modification of
these functionalities.
IMPORTANT INFORMATION
AIR SERIES
To Next Page
Need help?
General
