AUTEC Air LK6 - START Pushbutton; FUNCTION Pushbutton; STOP Pushbutton

AUTEC - Air series
Operation 13
LILK6E00-01
7.4 START pushbutton
The START pushbutton is used to:
- start the radio remote control (see paragraph 6.1)
- activate the horn when the radio remote control is started.
7.5 FUNCTION pushbutton
TheFUNCTIONpushbuttoncanbematchedwithdi󰘯erentrelayfunctionsonthereceiving
unit (see technical data sheet).
7.6 STOP pushbutton
The STOP pushbutton should be pressed when it is necessary to immediately
stop the machine when a dangerous condition occurs.
When the STOP pushbutton is pressed, the machine stops and the transmitting unit switches
o󰘯.
To start working again after the STOP pushbutton has been pressed, do the following:
- make sure that the working and usage conditions are safe
- pull or turn the STOP pushbutton in the arrow direction to unlock it
- start up the radio remote control.