AUTEC HACRP8 - Description; Technical data

2
LIRPDE00-03
Description
AUTEC - Air series
1 Description
C
B
A
H
G
J
SERIAL N. XXXXXX
MANIF. DATE XXXX
RADIO MODULE
POWER SUPPLY
AIRRT32NM
45-400V ±10%(0.3A)50-60Hz
FREQUENCY 433.050-434.790MHz
N12335
FREQUENCY 915-928MHz
- Prima dell'accensione leggere il manuale d’uso. - Attenersi alle norme di sicurezza.
- Togliere l’alimentazione e attendere 10 secondi in caso di apertura.
- Before switching on please read the user manual. - Adhere to safety rules.
- Disconnect power source and wait 10 seconds before opening.
D E F
K
A Power supply protection fuse
B Connector for buzzer
C DIP switches
D Red indicator light
E Technical data plate
F Identi󰘰cation plate
G
Electronic module and address
key
H STOP contacts protection fuses
J Plug or cable gland
K Buzzer
2 Technical data
Power supply .......................................................................................... 45-400V (0.3A)
Power supply protection fuse ............................................................ 2A T 500V (5x20mm)
Antenna .................................................................................................................. internal
STOP contacts rated current .......................................................................... 4A (250V )
STOP contacts protection fuse ......................................................... 4A T 250V (5x20mm)
Commands rated current ................................................................................ 4A (250V )
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Weight ....................................................................................................... 0.65kg (1.43Lb)