AUTEC Dynamic ARX - User Manual

Original instructions
DYNAMIC SERIES
Part D: ARX receiving unit
INDEX
1 Description ............................................................................................................ 2
1.1 Safety functions of the ARX receiving unit ....................................................... 3
2 Technical data ....................................................................................................... 3
3 Technical data sheet ............................................................................................. 3
4 Plates ..................................................................................................................... 4
5 Light signals .......................................................................................................... 4
5.1 POWER LED (green) ....................................................................................... 4
5.2 ALARM LED (red) ............................................................................................ 5
5.3 STATUS LED (blue) ......................................................................................... 5
5.4 SETUP LED (yellow) ........................................................................................ 5
6 Values of proportional outputs ............................................................................ 6
6.1 Calibrating maximum and minimum values of proportional outputs .................. 7
6.2 Calibrating values related to the rest position of proportional outputs (o󰘯set) ... 8
6.3 Inversion of movement direction of the joystick's axis ...................................... 8
6.4 Restoring factory settings ................................................................................ 9
7 Malfunction signalled by the receiving unit ...................................................... 10
AUTEC
LIARXE00-00

Summary

Unit Description

Safety Functions of the ARX Receiving Unit

Details the safety functions available for the ARX receiving unit, including STOP and UMFS functions.

Technical Data and Specifications

Technical Data Sheet

Information regarding the wiring diagram, unit configuration, and command matching.

Unit Identification Plates

LED Status Indicators

POWER LED (Green)

Indicates the status of the receiving unit and the radio link connection.

ALARM LED (Red)

Warns about anomalies detected within the receiving unit, such as output errors.

STATUS LED (Blue)

Indicates anomalies on outputs or power supply, and reception of data.

SETUP LED (Yellow)

Shows the status of the data memory and the address key.

Proportional Output Configuration

Calibrate Max;Min Proportional Outputs

Procedure to calibrate maximum and minimum values for proportional outputs.

Calibrate Proportional Output Offset

Procedure to calibrate the rest position (offset) of proportional outputs.

Invert Joystick Axis Direction

Procedure to invert the movement direction of a joystick axis.

Restore Factory Settings

Procedure to restore the receiving unit's proportional output settings to factory defaults.

Malfunction Troubleshooting

AUTEC Dynamic ARX Specifications

General

Brand	AUTEC
Model	Dynamic ARX
Category	Receiver
Language	English