AUTEC Dynamic ARX - Unit Identification Plates; LED Status Indicators; POWER LED (Green)

4 Plates
The receiving unit has the following plates:
Plate Position Content
radio remote control
identi󰄈cation plate
On the cover of the
receiving unit
Radio remote control serial number
(S/N), bar code and manufacturing year.
technical data plate
On the cover of the
receiving unit
MODEL, TYPE and main receiving unit
technical data, marking and possible
radio remote control marks.
5 Light signals
The receiving unit ARX has four LEDs:
- POWER is green
- ALARM is red
- STATUS is blue
- SETUP is yellow
5.1 POWER LED (green)
The POWER LED indicates the status of the receiving unit and of the radio link.
The POWER LED... Meaning
…is o󰓐 The receiving unit is switched o󰘯.
...is on The receiving unit is powered and there is no radio link.
… blinks
The receiving unit is powered and radio link has been
built.
4
LIARXE00-00
Plates
AUTEC - Dynamic Series