AUTEC LK NEO 12 - 2 Technical Data; Technical Data of Units LK NEO 10 and LK NEO 12; Technical Data of Unit LK NEO 10 DF; 3 Technical Data Sheet

AUTEC - Air series
Technical data 5
LILK1E00-01
2 Technical data
2.1 Technical data of units LK NEO 10 and LK NEO 12
Power supply (battery MHM03) .............................................................................. 3.6V
Power supply (battery LPM01) ............................................................................... 3.7V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ................................................................ 265x85x49mm (10.43x3.35x1.92In)
Weight ....................................................................................................... 450g (0.992Lb)
Run time at 20°C (68°F):
- with battery MHM03 .................................................................................................... >8h
- with battery LPM01 ................................................................................................... >16h
2.2 Technical data of unit LK NEO 10 DF
Power supply (battery LPM01) ............................................................................... 3.7V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ................................................................ 265x85x49mm (10.43x3.35x1.92In)
Weight ....................................................................................................... 450g (0.992Lb)
Run time at 20°C (68°F) ............................................................................................ >10h
3 Technical data sheet
Thetechnicaldatasheetcontainsthetransmittingunitcon󰘰gurationandshowsthematching
between commands sent and machine functions/movements. It also contains the wiring
diagram showing the connection between the receiving unit and the machine.
Eachtechnicaldatasheetmustbe󰘰lledin,checkedandsignedbytheinstaller,whois
responsible for a correct wiring.
A technical data sheet must always be kept toghether with this manual (always keep a copy
of the technical data sheet when it is used for administrative purposes).
The wiring of the receiving unit outputs must always re󰄉ect the wiring
indicated in the technical data sheet.