18
1) Use UP/DOWN button to select Erase Codes from Diagnostics
Menu and press Y button.
2) A warning message comes up asking for your confirmation.
l If you do not wish to proceed to erase the codes, press N
button or use UP/DOWN button to select NO and then
press Y button to exit. A “Command Canceled!” message
shows up. Press any key or wait a few seconds to return.
3) Press Y button to erase.
l If the codes are cleared successfully, an “Erase Done!”
message shows up.
l If the codes are not cleared, then an “Erase Failure. Turn
Key on with Engine off!” message displays.
C. Deactivate Brake
WARNING: Deactivate the SBC system before carrying out any
maintenance/service work on the brakes such as changing of pads,
discs and fluids!
Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
Make sure the vehicle is properly blocked after deactivation of the
system.
.............Erase Codes............ ...
Erase trouble codes!
Are you sure?
YES NO
............ Select Function ...... ...
1) Read Codes
►2) Erase Codes
3) Deactivate Brake
4) Activate Brake
To Next Page
Loading...