15
3) Use UP/DOWN button to enter new pad thickness, and press Y
button to confirm.
l If you want to quit the setting, press N button and a
“Command Cancelled!” message comes up.
4) An “Adaptation Done!” message comes up on device screen
indicating the setting is performed successfully.
l If the setting is not carried out successfully, an “Adaptation
Failed!” message shows. Repeat steps above to try again.
5) Wait a few seconds or press any key to return.
4.2 Diagnose Mercedes SBC
The MaxiEST
TM
EST201 is able to deactivate/activate SBC functions,
change brake fluid/bleed brake system, inspect brake air, read/clear
SBC trouble codes, and retrieve ECU information on Mercedes
vehicles that are equipped with SBC system.
1) Use UP/DOWN button to select SBC-Mercedes from
Diagnostic Menu and press Y button to confirm.
2) Wait a few seconds while the device is communicating with the
vehicle until following screen shows.
…… Diagnostic Menu…………… …
1/3
1) EPB-Audi A8
2) EPB-Other VAG
►3) SBC-Mercedes
........ Adaptation ...... ...
03 mm
[ ] or [ ] = Change
[N] = Exit, [Y] = Confirm
To Next Page
Loading...