To Next PageTo Next PageWhat to do if my Autel Battery Charger shows over-voltage?
If your Autel Battery Charger indicates an over-voltage issue, use a multimeter to check the voltage on the power input. If the voltage is greater than or equal to 120% of the rated voltage (276 V), contact your local power grid company, as this indicates a problem with the incoming power supply.
What to do if my Autel Battery Charger shows under-voltage?
If your Autel Battery Charger indicates an under-voltage issue, use a multimeter to check the voltage on the power input. If the voltage is less than or equal to 70% of the rated voltage (161 V), contact your local power grid company, as this indicates a problem with the incoming power supply.
What to do if my Autel Battery Charger has a power failure?
If your Autel Battery Charger experiences a power failure, ensure that the switch to the circuit breaker is turned on. This will restore power to the charger if the breaker was tripped.
What to do if my Autel Battery Charger has a ground fault?
If your Autel Battery Charger indicates a ground fault, make sure that the charger is grounded correctly. Proper grounding is essential for safe and reliable operation.
Why does my Autel Battery Charger charge session not start as scheduled?
To ensure scheduled charging works correctly with your Autel Battery Charger, do not insert the connector into your EV charging port before setting up a charging schedule for the first time. Insert the EV charging cable after the schedule is set up.
How to fix Autel Battery Charger Bluetooth connection failure?
If you're experiencing Bluetooth connection issues with your Autel Battery Charger, check whether the QR code on the charger is consistent with the QR code on the Installation Guide. If the QR codes match, ensure that Bluetooth is enabled on your mobile device. If the issue persists, it may require further assistance.
General| Brand | Autel |
|---|---|
| Model | MaxiCharger AC Wallbox Home |
| Category | Automobile Accessories |
| Language | English |
Explains text conventions like bold text, notes, and important messages used in the manual.
Details the MaxiCharger AC Wallbox and its components with diagrams.
Lists and illustrates optional features like ambient light sensor, display, and SIM card socket.
Explains the function buttons and various screen displays like Boot, Standby, Charging, etc.
Illustrates the electrical wiring diagrams for MCB, RCD, and emergency stop connections.
Lists detailed technical specifications for product information and general characteristics.
Explains the coding system for different MaxiCharger AC Wallbox models.
Covers preliminary requirements, unpacking, and site preparation before installing the charger.
Details the physical mounting and installation steps for the charger.
Lists all necessary parts and tools required for the installation process.
Step-by-step guide on how to physically mount and attach the charger to the wall dock.
Explains the procedure for connecting the AC input cable and wiring the power supply.
Details how to remove the charger's maintenance and inner covers to access wiring points.
Guides on stripping wires and inserting the AC input cable into the charger's gland.
Specifies connections for single-phase AC input wiring at the terminal block.
Specifies connections for three-phase AC input wiring at the terminal block.
Explains how to connect the power supply wiring to the distribution box.
Details the required protective devices like MCB, RCD, and RCBO for installation.
Instructions on how to supply power to the charger and initiate self-checks.
Guides on how to initiate a charging session using different methods.
Steps to start charging using the cable model, including handle insertion and authorization.
Steps to start charging using the socket/shutter model, including handle insertion and authorization.
Instructions on how to properly end a charging session.
Procedures to stop charging for cable model chargers, including automatic and manual methods.
Procedures to stop charging for socket/shutter model chargers, including automatic and manual methods.
A table listing common problems and their corresponding solutions for the MaxiCharger.
Provides contact information for technical support and service for the MaxiCharger.
