What to do if my Autel Battery Charger shows over-voltage?
If your Autel Battery Charger indicates an over-voltage issue, use a multimeter to check the voltage on the power input. If the voltage is greater than or equal to 120% of the rated voltage (276 V), contact your local power grid company, as this indicates a problem with the incoming power supply.
What to do if my Autel Battery Charger shows under-voltage?
If your Autel Battery Charger indicates an under-voltage issue, use a multimeter to check the voltage on the power input. If the voltage is less than or equal to 70% of the rated voltage (161 V), contact your local power grid company, as this indicates a problem with the incoming power supply.
What to do if my Autel Battery Charger has a power failure?
If your Autel Battery Charger experiences a power failure, ensure that the switch to the circuit breaker is turned on. This will restore power to the charger if the breaker was tripped.
What to do if my Autel Battery Charger has a ground fault?
If your Autel Battery Charger indicates a ground fault, make sure that the charger is grounded correctly. Proper grounding is essential for safe and reliable operation.
Why does my Autel Battery Charger charge session not start as scheduled?
To ensure scheduled charging works correctly with your Autel Battery Charger, do not insert the connector into your EV charging port before setting up a charging schedule for the first time. Insert the EV charging cable after the schedule is set up.
How to fix Autel Battery Charger Bluetooth connection failure?
If you're experiencing Bluetooth connection issues with your Autel Battery Charger, check whether the QR code on the charger is consistent with the QR code on the Installation Guide. If the QR codes match, ensure that Bluetooth is enabled on your mobile device. If the issue persists, it may require further assistance.
General| Brand | Autel |
|---|---|
| Model | MaxiCharger AC Wallbox Home |
| Category | Automobile Accessories |
| Language | English |
To Next Page
