Thank you for purchasing AUTEL diagnostic tool. Manufactured to a high standard, our tool will, if used accord-
ing to these instructions and properly maintained, give you years of trouble-free performance.
Email: sales@autel.com
Web: www.autel.com
Quick Reference Guide
Getting Started
IMPORTANT: Before operating or maintaining this unit, please read the quick guide and user manual carefully,
pay extra attention to the safety warnings and precautions. Use this unit correctly and properly. Failure to do so
may cause damage and/or personal injury and will void the product warranty.
1
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with
device’s SN and password.
3
Connect the main cable’s 16-pin male adapter to the
vehicle’s DLC, which is generally located under the
vehicle dash.
Tighten the captive screws.
4
Your Diagnostic Tablet is now ready for use as a diag-
nostic device.
2
Long press the Lock/Power button to turn on the
Diagnostic Tablet.
Connect the main cable’s female adapter to the
Diagnostic Tablet and tighten the captive screws.
MaxiCOM MK808 / MaxiPro MP808
To Next Page
Need help?
General
