68
TPMS Relearn
This function is used to write sensor IDs into the vehicle ECU for sensor
recognition.
Relearn is needed to be performed when the new sensor IDs are different
from the original sensor IDs stored within TPMS ECU.
There are THREE ways for Relearn.
Stationary Relearn
Automatic Relearn
OBD Relearn
Stationary Relearn
Stationary Relearn requires the vehicle be placed in the “Learn Mode”.
Tap Relearn to access the relearn menu.
Figure 5-23 Sample Auto Create Screen
To Next Page
Loading...
