72
After performing the Relearn procedure, tap Clear DTCs to clear the trouble
codes present in the TPMS ECU.
TPMS by OEM Part No.
If the sensor's OEM part number is known, this function is an efficient method
to activate and program MX-Sensors.
Application Scenarios
The following are two typical scenarios in which this method is ideal.
In the workshop
If the mounted sensor is faulty and the part number is known to the technician,
the technician can use this method to Check the original sensor, and then
write the information that was retrieved into a new MX-Sensor via
Programming. The newly programmed MX-Sensor is ready to replace the
original sensor and be installed on the vehicle.
In the tire shop
If a customer needs to replace one or more tires and sensors , or purchase a
large amount of sensors for one vehicle model and the OEM part number of
this model is known, this function can be used to program up to 20 sensors
at the same time.
Function Operations
1. Tap OEM Part No. on the TPMS service menu to access the next screen.
A list of sensor OEM part numbers will display. Swipe the screen left and
right to find the correct OEM part number of the sensor on the test vehicle.
To Next Page
Loading...
