Autel MaxiSys Elite II Pro User Manual

i
Trademarks
Autel
®
, MaxiSys
®
, MaxiDAS
®
, MaxiScan
®
, MaxiTPMS
®
, MaxiRecorder
®
, and MaxiCheck
®
are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United
States, and other countries. All other marks are trademarks or registered trademarks of their
respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted in any
form or by any means electronic, mechanical, photocopying, recording, or otherwise without
the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest
information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While information of
this manual has been carefully checked for accuracy, no guarantee is given for the
completeness and correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
Autel will not be liable for any direct, special, incidental, or indirect damages, or for any
economic consequential damages (including lost profits) as a result of using this product.
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra
attention to the safety warnings and precautions.
For Services and Support:
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
support@autel.com
For details, please refer to the Service Procedures in this manual.

Autel MaxiSys Elite II Pro Specifications

General

RAM	4 GB
Operating System	Android
Connectivity	Wi-Fi
Front Camera	5MP
Sensors	Ambient Light Sensor
Audio Input/Output	Microphone, Speaker
Tested Battery Life	Up to 8 hours
Operating Temp	50°C (14°F to 122°F)
Storage Temp	-20 to 60°C (-4 to 140°F)
Diagnostic Functions	adaptations

Summary

Using This Manual

1.1 Conventions

Explains the manual's formatting and symbols used.

General Introduction

2.1 MaxiSys Tablet

Details the MaxiSys tablet's features, components, and specifications.

2.2 MaxiFlash VCI

Describes the MaxiFlash VCI, its functions, and specifications.

Getting Started

3.1 Power Up

Instructions for turning on and starting the MaxiSys tablet.

3.2 Power Down

Procedures for safely shutting down and rebooting the MaxiSys tablet.

Diagnostics

4.1 Establish Vehicle Communication and Selection

Details how to connect the MaxiSys tablet to a vehicle for diagnostics.

4.3 Auto Scan

Performs a comprehensive scan of vehicle systems to locate faults and DTCs.

4.7 Live Data

Displays real-time data and parameters from the vehicle's ECU.

4.10 Programming and Coding

Updates vehicle control modules and reprograms adaptive data.

Intelligent Diagnostics

5.1 Accessing Intelligent Diagnostics

Steps to access and utilize the Intelligent Diagnostics function for fault analysis.

5.2 Intelligent Diagnostics Operation

Details the components and operation of the Intelligent Diagnostics feature.

Service

6.1 Oil Reset Service

Procedure for resetting the engine oil life system after an oil change.

6.2 Electric Parking Brake (EPB) Service

Maintenance for the electronic parking brake system, including safety.

Battery Test

7.2 In-vehicle Test

Tests battery, starter, and generator health while installed in a vehicle.

7.3 Out-vehicle Test

Tests the battery's health when it is not connected to a vehicle.

Maintenance and Service

21.1 Maintenance Instructions

Provides instructions and precautions for maintaining the tablet and VCI.

21.2 Troubleshooting Checklist

Lists common issues and their potential solutions for the tablet.

21.3 About Battery Usage

Information and precautions regarding the tablet's built-in lithium-ion polymer battery.