AUTEI-
Email: sales@autel.com
Web: www.autel.com
Quick Reference Guide
MaxiSys MS906 Pro
Thank you for purchasing this Autel MaxiSys MS906 Pro. Our tools are manufactured to a high standard and — when used
according to these instructions and properly maintained — will provide years of trouble-free performance.
O MaxiSys MS906 Pro Display Tablet
10 11 13
8 inch LED Capacitive Touchscreen
Ambient Light Sensor — detects ambient brightness
2
4
5
6
7
8
10
11
12
15
3 Power LED
Front Camera
Microphone
Collapsible Stand
the tablet
Rear Camera
Camera Flash
9 TF Card Slot
extends from the back to allow hands-free viewing of
o
o
O VCI (Vehicle Communication Interface) Device
DC Power Supply Input Port
Mini USB Port
USB Port (for VCI Connection)
13 HDMI Port
14. Headset Jack (3-band 3.5mm)
Lock/Power Button press and hold to turn on/off the tab et, or tap to
lock the screen
— MaxiVCl V200
AUTEL
va LED Description
LED
Power LED
Vehicle
/Connection LED
O
Color
Yellow
Green
Flashing Red
Green
Blue
Flashlight Power Button
2 Power LED
3. Vehicle/Connection LED
4
Vehicle Data Connector (16 pin)
USB Port
5
Description
The VCI is powered on and performing self-check
The VCI is ready for use.
The firmware is updating
• Solid Green: The VCI is connected via USB cable.
• Flashing Green: The VCI is communicating via USB cable
• Solid Blue: The VCI is connected via Bluetooth
• Flashing Blue: The VCI is communicating via Bluetooth
Need help?
General
To Next Page