44
Figure 5.7
4) Insert the correct MX-Sensor into the sensor slot as displayed
below:
Figure 5.8
NOTE: Please pay attention to the MX-Sensor type displayed in
the screen and insert the correct MX-Sensor. Inserting incorrect
MX-Sensor will cause programming failure.
5) Press the Y button to write in the new created sensor ID to the
MX-Sensor and the screen will show as below (Figure 5.9), or the
N button to exit without change. If an error prompt displays
(Figure 5.10), please try another type of MX-Sensor, for the type
of the inserted MX-sensor may be incorrect.
To Next Page
Loading...
