52
character. Use the Y button to finish the input and the screen will
display a message requiring the user for confirmation. Select “Yes”
to save the sensor ID and continue programming or “No” to return
to the previous screen.
Figure 5.25
NOTE: Different sensor from manufacturer may have different ID
character length limit. The scan tool will automatically recognize
the OEM sensor ID character length, and prompt a message when
entered character length is out of limitation.
Figure 5.26
5) Insert the correct MX-Sensor and press the Y button to start
programming or the N button to exit.
NOTE: If a random ID is entered, please perform TPMS Relearn
function after programming is finished. If the original ID is
entered, then there is no need to perform Relearn function.
To Next Page
Loading...
