Need help?Do you have a question about the Auto Crane 10006H and is the answer not in the manual?
Avoid electrocution by maintaining safe distances from power lines.
Warnings against exceeding load limits, improper cable use, and modifications.
Details on the crane's physical size, reach capabilities, and hoist cable specifications.
Vehicle chassis requirements, electrical system needs, and rotation capabilities.
Guidelines for operator qualifications and mandatory daily inspections.
Procedures for vehicle setup, outrigger use, and safe load handling practices.
Never operate near electrical power lines. Maintain minimum clearance distances.
Checks before operation and safe methods for handling loads.
Key warnings regarding power lines, load limits, and cable usage.
Physical and skill requirements for crane operators.
Guidelines for operator behavior and duties during operation.
Specific procedures for attaching, moving, and handling loads safely.
Safety clearances and procedures for operating near power lines.
Steps for preparing the crane for operation, including boom and outrigger setup.
Instructions for deploying and using hydraulic and manual outriggers.
Overview of the FM transmitter's buttons, lights, and layout.
Procedures for charging the transmitter and understanding safety features.
Details on inspection types, intervals, and personnel.
Daily inspection points for critical crane components.
Comprehensive checks for structural integrity, hydraulics, and wear.
Safety steps before starting maintenance or repairs.
Guidelines for component adjustments, repairs, and routine lubrication.
Criteria for determining when wire rope needs replacement.
Procedures for keeping batteries charged, clean, and checking electrolyte levels.
Methods for testing battery condition and the process for battery replacement.
Decals providing operating instructions and emphasizing the need for training.
Decals warning about hazards like electrocution, boom proximity, and load proximity.
Decals related to the load sensor and warnings against tampering.
List of supplied crane parts and hydraulic reservoir specifications.
Instructions for electrical wiring and hydraulic plumbing connections.
Solutions for common issues like no flow, low flow, or pressure problems.
Explanation of error codes (EC01-EC18) and their possible causes and solutions.
Explanation of other diagnostic codes (EC19, LBV, HBV, OVL, RS1, RS2, A2B).
Understanding normal, slow, and boom limit operating status readouts.
General| Brand | Auto Crane |
|---|---|
| Model | 10006H |
| Category | Construction Equipment |
| Language | English |
To Next Page
