EasyManua.ls Logo

AUTOCAR E-ACTT - Alternate Procedure (if Ignition Switch Is Inaccessible)

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AUTOCAR E-ACTT™FIRST RESPONDERS GUIDE
888-218-3611
AWE 00424 Rev. 001
7
3. Remove the cables from the top battery and press the red button on the circuit breaker.
Push RED Button to Disconnect 24V Power
Figure 7
4. If access to the battery terminals is not possible, cut the three 12V cables in the location
shown in Figure 8.
Cut these 3 cables to disconnect 12V power
Figure 8