How to troubleshoot AUTOCHAIR Smart Lifter Mobility Aid when there is no power?
If your AUTOCHAIR Mobility Aid has no power, first ensure the Smart Lifter is switched on and the power light is illuminated. Then, check the fuse located next to the car’s battery, using the spare fuse if necessary. Finally, verify the battery's condition.
What to do if the AUTOCHAIR Mobility Aid handset doesn't work?
If the handset for your AUTOCHAIR Mobility Aid isn't working, first ensure the Smart Lifter is switched on. Next, check the fuse located next to the car’s battery, using the spare fuse if necessary. Inspect the handset and cable for any damage or loose connections.
Why does my AUTOCHAIR Mobility Aid Smart Lifter stop during lifting?
If the Smart Lifter on your AUTOCHAIR Mobility Aid stops during lifting, it may be due to the mobility device becoming caught on the vehicle, or that the Smart Lifter is protected by a fuse located near the vehicle battery. If a load greater than the Smart Lifter’s capacity is lifted, the fuse could blow.
What to do if AUTOCHAIR Mobility Aid Smart Lifter turns on but won’t lift?
If the Smart Lifter on your AUTOCHAIR Mobility Aid turns on but won’t lift, check the actuator power supply to ensure it hasn't become disconnected. Also, inspect the electrical plugs between the 'UP/DOWN actuator and power supply; reconnect them if they have come apart.
Why is my AUTOCHAIR Mobility Aid Smart Lifter lifting so slowly?
If your AUTOCHAIR Mobility Aid's Smart Lifter is lifting very slowly, it could be due to a low battery or because the mobility device's weight is near the Smart Lifter’s maximum weight capacity.
Explains symbols used for warnings and mandatory/prohibited actions.
Details on maximum weight capacity and checks before operation.
Guidelines for safe positioning of the operator and vehicle during use.
Critical warnings for safe operation, including pinch points and misuse.
Instructions for using the specific lifting strap for wheelchairs.
Procedures for safely disconnecting and removing the Smart Lifter unit.
Procedures for correctly reinstalling the Smart Lifter unit.
Addresses frequent issues like no power or handset not working.
Routine maintenance tasks and recommended service intervals.
Guidelines for safely cleaning the Smart Lifter unit.
Covers what the warranty includes and excludes.
Details for recording serial numbers and setup configurations.
Identifies different models and their maximum lifting capacities.
Diagrams identifying parts for right and left hand installations.
Illustrates various spreader bar attachments available for the Smart Lifter.
General| Brand | AUTOCHAIR |
|---|---|
| Model | Smart Lifter |
| Category | Mobility Aid |
| Language | English |
To Next Page
