4
© 2012 Directed. All rights reserved.
Using Your System
Commands At a Glance
System State
Press/Release
Press/Hold
for 3 sec.
ENGINE OFF START ENGINE CAR FINDER
ENGINE ON UNLOCK DOORS STOP ENGINE
Note: If a feature cannot be activated when performing a command
with the 2-way remote control, a fault tone plays as an alert.
Start Engine
When the engine is OFF, press and release the remote control button
to start the engine.
See "Using Remote Start" on page 6 for more feature details.
Unlock Doors
When the engine is ON with remote start, press and release the re-
mote control button. The doors unlock, the parking lights flash, the horn
sounds (if connected) as confirmation. The 7213A (2-way) remote con-
trol emits tones.
Note: Horn honk may be an optional feature that requires additional
parts and labor.
To Next Page
Loading...
Need help?
General
