Need help?Do you have a question about the Automate AM7 and is the answer not in the manual?
General| Immobilizer | Yes |
|---|---|
| Remote Start | Yes |
| System Type | 2-Way |
| Shock Sensor | Yes |
| Smartphone Control | Yes |
| GPS Tracking | Yes |
Lists all the components and accessories that come with the product.
Provides crucial details regarding system installation and user responsibilities.
Guidance on maintaining the system and its components for optimal performance.
Information on product warranty validation and registration procedures.
Compliance statement regarding FCC rules for device operation.
How the receiver learns and assigns functions to transmitter buttons.
Details the default button assignments for arming, disarming, and other functions.
Critical safety precautions to observe during system operation and installation.
How to arm the system while the vehicle is in operation.
Procedure for disarming the security system using the transmitter.
Method to silence and reset a triggered system without fully disarming.
How to activate the alarm to attract attention in emergency situations.
Temporarily disabling arming/triggering for vehicle service or washing.
Allows vehicle to remain running after key removal for short periods.
Keeps engine running for turbo cool-down or short periods after arrival.
Prevents starter engagement during remote start to avoid damage.
Temporarily disables remote start functionality using a toggle switch.
Shuts down the engine if RPMs exceed or fall below programmed levels.
Inputs that control or prevent remote start operation, like hood and brake.
Circuitry to ignore false triggers from faulty sensors or environmental factors.
Overview of the system's diagnostic capabilities and monitoring functions.
Interpreting system responses during arming, including bypass notifications.
Interpreting extra chirps during disarming, indicating tamper alerts or bypassed zones.
Audible reports of the system's status through siren chirps.
How to interpret LED blinks to identify triggered or active zones.
Secure transmission technology that changes transmitter codes for enhanced security.
Details on the 434 MHz transmission frequency for improved signal stability.
Allows system to recall personalized settings for up to four different users.
System retains its state (Valet, Arm, Disarm) after power interruptions.
Automatically reduces current draw on the vehicle's battery when idle.
Lists available expansion modules like sensors, locks, and window control.
Quick instructions for arming, disarming, and special modes.
Procedures for transmitterless disarming, panic, remote start, and disabling.
To Next Page
