22
© 2005 directed electronics—all rights reserved
To activate:
1. Park the vehicle and set parking brake.
2. Remove your foot from the brake pedal and leave the engine
running.
3. Press and release the and buttons at the same time.
4. The lights will flash to indicate the remote start has entered
short run turbo mode.
5. Turn off the key, the engine will keep running.
6. Exit and secure the vehicle.
7. The engine will turn off after the programmed run time.
timer/temperature mode
By pressing the remote and buttons the parking
lights will flash 4 times and then start the vehicle and run for the
set duration in timer mode. The remote start can be shut off by
the transmitter by pressing the remote start button and
remain in timer mode, but if any other shut down zones or the
ignition becomes active the timer mode will cancel.
1. Press Timer mode buttons.
2. The vehicle will confirm with 4 parking light flashes.
3. A 1-second delay will start.
➜
To Next Page
Loading...
Need help?
General
