Automatic Systems TR490 - 3 Installation; First Step

 Automatic Systems TR490-NInstall-EN p7/16
3. INSTALLATION
3.1. First step
Fig. 4
4:1 Front end section ("A")
4:2 Rear end section ("B")
Legend:
4:3 Hood
4:1
4:3
4:2
A
B
 The tripod turnstile has been packaged suitable for transport. Move the material to the
installation site with the assistance of a fork-lift, or manual hand truck and remove the packing
material.
 Unlock (4:4) and open the hood (4:3). Keys are supplied as accessories in a separate bag.
 Raise and remove the front columns (4:1) et (4:2).
 Check the state of the material. Though it has been carefully packed, damage may have
occurred during transport. Any transportation damage should be repaired, or components
replaced.