Need help?Do you have a question about the Automatic Technology MegaCode and is the answer not in the manual?
Accesses the primary menu for coding and editing transmitters.
Configuration options for Output One of the receiver.
Configuration options for Output Two of the receiver.
Configuration options for Output Three of the receiver.
Configuration options for Output Four of the receiver.
Settings for various operating modes of the receiver.
Functions related to the programmable time clock feature.
Tools for diagnosing receiver and system performance.
Utilities for managing the receiver's memory.
Power requirements for the MegaCode® receiver.
Details on connecting output terminals.
Instructions for connecting inputs and initial power-on.
Information on compatible transmitter brands.
Steps to access the transmitter coding menu.
Procedure for saving a transmitter's code.
Assigning functions to transmitter buttons.
Modifying the storage location of a transmitter.
Exiting the coding menu to the main display.
Methods to access the list of stored transmitters.
How to move through the transmitter list.
Procedure for coding new or replacing existing transmitters.
Procedure for removing a transmitter from memory.
Procedure for editing stored transmitter details.
Using an existing transmitter to select a function for remote coding.
Initiating remote coding mode via a pin.
Pressing the button on the new transmitter to be coded.
Repeating the button press to confirm the coding.
Instructions for finding specific parameters within menus.
Steps for modifying parameter values.
Option to restore default parameter settings.
Exiting parameter editing back to the menu.
Sets the duration of the output pulse.
Defines the units for pulse time settings.
Configures the duration of output flashing.
Allows flash cycle to complete if interrupted.
Changes the output operation from N/O to N/C.
Configures Trigger Input One to control the output.
Sets the contact type for Trigger Input One.
Disables the output via a software input.
Sets the duration of the output pulse.
Defines the units for pulse time settings.
Configures the duration of output flashing.
Allows flash cycle to complete if interrupted.
Changes the output operation from N/O to N/C.
Configures Trigger Input Two to control the output.
Sets the contact type for Trigger Input Two.
Disables the output via a software input.
Sets the duration of the output pulse.
Defines the units for pulse time settings.
Configures the duration of output flashing.
Allows flash cycle to complete if interrupted.
Changes the output operation from N/O to N/C.
Configures Trigger Input Three to control the output.
Sets the contact type for Trigger Input Three.
Disables the output via a software input.
Sets the duration of the output pulse.
Defines the units for pulse time settings.
Configures the duration of output flashing.
Allows flash cycle to complete if interrupted.
Changes the output operation from N/O to N/C.
Configures Trigger Input Four to control the output.
Sets the contact type for Trigger Input Four.
Disables the output via a software input.
Sets default output functions for transmitter buttons.
Enables or disables the remote code set feature.
Enables or configures activity report outputs.
Sets the controller ID for activity reports.
Enables or disables vacation mode.
Setting the current time and date.
Displaying or editing time clock programs.
Adjustments for time clock settings, including daylight saving.
Viewing the state of control inputs.
Testing receiver/transmitter functionality.
Reviewing a log of the last 64 recorded events.
Displaying transmitter storage usage.
Testing the console buttons and beeper.
Clears receiver memory and reloads factory defaults.
Clears the transmitter storage memory.
Detailed technical data including power, outputs, and capacity.
Details of the product warranty and conditions.
Conditions and events that void the warranty.
General| Brand | Automatic Technology |
|---|---|
| Model | MegaCode |
| Category | Receiver |
| Language | English |
To Next Page
