Automatic Technology MegaCode - Page 3

Owner Installation Instructions MegaCode® Receiver 3
Menu 5.1: Output Pulse Time 17
Menu 5.2: Pulse Time Units 17
Menu 5.3: Flash On Time 17
Menu 5.4: Flash Off Time 17
Menu 5.5 Complete Flash Sequence 17
Menu 5.6: Output Four Inverted 17
Menu 5.7: Trigger 4 Input 17
Menu 5.8: Trigger 4 Input Contact 17
Menu 5.9: Disable 4 Input Contact 17
Menu 6 Operating Modes 17
Menu 6.1: Default Tx Button 1 Function 17
Menu 6.2: Default Tx Button 2 Function 17
Menu 6.3: Default Tx Button 3 Function 17
Menu 6.4: Default Tx Button 4 Function 17
Menu 6.5: Remote Code 17
Menu 6.6: Activity Report 17
Menu 6.7: Activity Report ID 17
Menu 6.8: Vacation 17
Menu 6.9: Password Protection 18
Menu 6.10: Tx# Grouping 18
Menu 7 Time Clock 18
Time Clock Operation 18
Time Clock Settings 18
Menu 7.1 Set Time/date 18
Menu 7.2 View Programs 18
Menu 7.3 Settings 19
Menu 7.3.1 Run Programs 19
Menu 7.3.2 Disable 4 Input 19
Menu 7.3.3 Disable 4 Input Contact 19
Menu 7.3.4 Daylight Saving Time Adjust 19
Menu 8 Diagnostics Tools 19
Menu 8.1 Test Inputs 19
Menu 8.2 Test Tx’ers 19
Menu 8.3 Display History 20
Menu 8.4 Memory Usage 20
Menu 8.5 Console Test 20
Menu 9 Memory Tools 20
Menu 9.1 Clr Control 20
Menu 9.2 Clr Tx’ers 20
System Specifi cations 21
Warranty 22