DL06 Micro PLC User Manual, 3rd Edition, Rev. E
5-36
Chapter 5: Standard RLL Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
In the following example, when X1 is on, Y2 through Y5 will be set on in the image register
and on the corresponding output points.
In the following example, when X1 is on, Y5 through Y22 will be reset (off) in the image
register and on the corresponding output module(s).
aaaY aaa
SETI
aaaY aaa
RSTI
1
B
ENT
X1 Y2
SETI
Y5
DirectSOFT32
Handheld Programmer Keystrokes
STR
$
SET
X
SHFT
8
I
ENT
2
C
5
F
1
B
ENT
X1 Y5
RSTI
Y22
DirectSOFT32
Handheld Programmer Keystrokes
STR
$
SHFT
8
I
5
F
2
C
2
C
ENT
RST
S
Operand Data Type DL06 Range
aaa
Ouputs Y 0–777
DS Used
HPP Used
DS Used
HPP Used
DirectSOFT
DirectSOFT
Set Immediate (SETI)
The Set Immediate instruction immediately sets, or turns
on an output or a range of outputs in the image register and
the corresponding output point(s) at the time the instruction
is executed. Once the outputs are set, it is not necessary for
the input to remain on. The Reset Immediate instruction
can be used to reset the outputs.
Reset Immediate (RSTI)
The Reset Immediate instruction immediately resets, or
turns off, an output or a range of outputs in the image
register and the output point(s) at the time the instruction is
executed. Once the outputs are reset, it is not necessary for
the input to remain on.
To Next Page
Loading...
