Need help?Do you have a question about the Automationdirect.com GS1-21P0 and is the answer not in the manual?
General| Horsepower | 1 HP |
|---|---|
| Input Phase | Single Phase |
| Braking Transistor | No |
| Enclosure | IP20 |
| Number of Outputs | 1 |
| Output Phase | Three Phase |
| Storage Temperature | -20 to 65°C |
| Protection | Overcurrent, Overvoltage |
Lists technical specifications for both 100V and 200V classes of the GS1 AC Drive.
Provides crucial wiring notes, safety warnings, and grounding information.
Details wiring specifications for input power and output terminals, including wire gauge.
Provides a step-by-step guide for navigating and setting drive parameters.
Illustrates practical setup examples for constant and variable torque applications.
Configuration settings related to the connected motor, such as voltage, amps, and RPM.
Configuration for protective functions like overload, over-current, and over-voltage.
Guides on connecting and communicating with DirectLOGIC PLCs using Modbus.
Details common fault codes, their descriptions, and corrective actions.
To Next Page
