DL06 Micro PLc USER MANUAL
Please include the Manual Number and the Manual Issue, both shown below,
when communicating with Technical Support regarding this publication.
Manual Number: D0-06USER-M
Issue: 3rd Edition, Rev. E
Issue Date: 8/18
Publication History
Issue Date Description of Changes
First Edition 7/02 Original
Rev. A 10/02 Updated drawing images and made minor corrections.
Rev. B 6/03 Added new PLC and made numerous corrections.
2nd Edition 3/04
Added two appendices, removed discrete module data and made numerous
corrections.
3rd Edition 3/07
Corrected all tables, many corrections to Chapters 2, 3, 4, 5, 6, and 7; Chapter 3
(HSIO) was moved to the Appendices and Chapter 4 was divided into Chapters 3 &
4; added DS5 Intelligent Boxes to Chapter 5; added Ramp/Soak example to Chapter
8; Numbering Systems and Serial Communications were added to Appendices; many
minor corrections were made throughout manual.
Rev. A 5/07 Minor corrections and updates.
Rev. B 6/11
Updated Chapter 5 with current DirectSOFT dialog views, corrected number of
registers needed to use the print message instruction, removed fuses and corrected
I/O wiring drawings, and other minor corrections and updates.
Rev. C 2/13
Added H0-CTRIO2 references.
Minor corrections and updates.
Added transient suppression for inductive loads.
Rev. D 6/16 Corrections and updates.
Rev. E 8/18 Corrections, updates, removed mention of the DA-EU-M from Appendix J.
To Next Page
Loading...
