To Next PageTo Next Page
Need help?Do you have a question about the Automess 6150AD1 and is the answer not in the manual?
General| Detector | GM Tube |
|---|---|
| Accuracy | ±15% |
| Power Supply | 2 x AA batteries |
| Energy Range | 45 keV to 3 MeV |
| Display | LCD |
| Operating Temperature | -20°C to +50°C |
Describes the primary use of the 6150AD for radiation measurement.
Summarizes the different models of the 6150AD and their features.
Details the physical construction of the instrument and its components.
Outlines the key measurement and operational functions of the device.
Provides instructions on how to operate the instrument and its basic functions.
Explains the procedure for powering the instrument on and off, including erase functions.
Explains how to use the Function key to access various display modes.
Details how to check the battery status and the battery warning system.
Explains the calibration process and parameters for accurate measurements.
Lists preset alarm thresholds for dose rate and dose.
Covers programming individual thresholds, increments, storage, and factory reset.
Describes the various display ranges and formats used by the instrument.
Details the different measuring ranges for dose rate and dose.
Analyzes the device's response to different radiation energies and directions.
Provides instructions for performing a radiological check of the instrument's accuracy.
Lists available wall holders and their applications as accessories.
Explains how to connect and communicate with the device via its serial interface.
