9. Installation
102
i. -|Transparentsettingguide|-
location that has calculated safety distance or more.
×T+C = 2,000mm/s×(t1+t2)+8×(d-14mm)
×T+C = 1,600mm/s×(t1+t2)+8×(d-14mm)
The total stopping time of entire
d Detection capability
The total stopping time of entire
0.23sec
××
a location that has calculated safety distance or more.
the hand detection is unnecessary.
×T+C = 1,600mm/s×(t1+t2)+850mm
The total stopping time of entire
d Detection capability
The total stopping time of entire
0.09sec