10. Check and maintenance
112
i. -|Transparentsettingguide|-
10. Check and maintenance
10.1 Check installation conditions
Checklist Check
2 Accessible to hazardous zone or source of the machine only by passing through the detection zone.
3
4
to, or greater than the calculated safety distance.
5
installation distance.
6
9
hazardous zone.
be seen from all sites.
10.2 Check wiring connection
Checklist Check
The power supply used for the product
2
3
The appearance of the wires connected to the product is not damaged, such as cracks, breakage of the outer
shell. And there are no sources for damage around the wiring.
4
5
6
9
related part of the control system.
To Next Page
Loading...