5. Safety-related function
72
i. -|Transparentsettingguide|-
5.6 Blanking
After setting the blanking function, check that it operates as intended.
Failure to follow this instruction may result in personal injury due to undetected human body.
blanking zone.
※
※
Description
The light curtain enters the lockout condition.
The tolerance can be set separately in each zone. The maximum number of tolerance as follows.
Tolerance
0
2
2
•
Setting item Changed item
beams
Tolerance
0
2
0
3
0
2
0
2
To Next Page
Loading...