Autonics TC4S User Manual

H-54
TC Series
Features
Economical Single Display Type, PID Control

Ordering Information

Specifications
Series TC4S TC4SP TC4Y TC4M TC4W TC4H TC4L
Power
supply
AC power 100-240VAC 50/60Hz
AC/DC power 24VAC 50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power
consumption
AC power Max. 5VA (100-240VAC 50/60Hz)
AC/DC power Max. 5VA (24VAC 50/60Hz), Max. 3W (24-48VDC)
Display method 7Segment (red), Other display (green, yellow, red) LED
Character size (W×H) 7.0×15.0
mm
7.4×15.0
mm
9.5×20.0
mm
9.5×20.0
mm
7.0×14.6
mm
11.0×22.0
mm
Input type
RTD DPt100Ω, Cu50Ω (allowable line resistance max. 5Ω per a wire)
Thermocouple K (CA), J (IC), L (IC)
Display
accuracy
※
1
RTD
At room temperature (23
℃
±5
℃
): (PV ±0.5% or ±1
℃
, select the higher one) ±1digit
Out of room temperature range: (PV ±0.5% or ±2
℃
, select the higher one) ±1digit
※
For TC4SP, add ±1
℃
by accuracy standard.
Thermocouple
※1:IncaseoftheACvoltagemodel,SSRdriveoutputmethod(standardON/OFFcontrol,cycle,control,phasecontrol)isavailableto
select.
※
2: It is unavailable for TC4SP, TC4Y.
※
3: 11-pin socket (PG-11, PS-11(N)) for TC4SP: sold separately.
● Realizes ideal temp. controlling with newly developed
PID control algorithm and 100ms high speed sampling
● Built-in relay output or SSR output selectable
: Enables to phase control and cycle control
with SSR drive output (SSRP function)
● Dramatically increased visibility using wide
display part
● Mounting space saving with compact design
: Approx. 38% reduced size compared with
existing model (depth-based)
● SV/PV deviation indicatable
Setting type
Item
Digit
Size
Alarm output
Power supply
Control output
N Indicator - Without control output
R Relay output + SSR drive output
※
1
2 24VAC 50/60Hz, 24-48VDC
4 100-240VAC 50/60Hz
N No alarm output
1 Alarm 1 output
2 Alarm 1 output + Alarm 2 output
※
2
S DIN W48×H48mm (Terminal block type)
SP DIN W48×H48mm (11-pin plug type)
※
3
Y DIN W72×H36mm
M DIN W72×H72mm
H DIN W48×H96mm
W DIN W96×H48mm
L DIN W96×H96mm
4 9999 (4digit)
C Set by touch switch
T Temperature controller
T S 1 4 R4C
※
1: Thermocouple L (IC) type, RTD Cu50Ω
At room temperature (23
℃
±5
℃
)
:
(PV ±0.5% or ±2
℃,selectthe
higher one) ±1digit
Out of room temperature range:

(PV ±0.5% or ±3
℃,selectthe
higher one) ±1digit
In case of TC4SP Series, ±1
℃
will be added.

Autonics TC4S Specifications

General

Dimensions	48 x 48 mm
Display Accuracy	±0.3% FS ±1 digit
Sampling Period	100 ms
Mounting	Panel mount
Control Method	ON/OFF control, P control, PI control, PD control, PID control
Input Type	Thermocouple, RTD
Power Supply	100-240VAC~ 50/60Hz
Output Type	Relay, Current
Display	7-segment LED
Operating Ambient Temperature	-10 to 50°C
Resolution	0.1°C or 1°C
Storage Temperature	-20 to 60°C (with no icing)

Summary

Features

High-Speed PID Control

Realizes ideal temperature controlling with PID algorithm and 100ms high speed sampling.

Selectable Output Types

Offers choice between relay output and SSR drive output for versatile application.

Ordering Information

Specifications

Unit Description

SV Setting Procedure

Parameter Group Overview

Parameter Group 1 Access

Parameter Group 2 Access

Parameter Group 1 Settings

Alarm, PID Tuning, and Input Settings

Configures alarm temps, PID parameters, input type, unit, correction, and filter.

Auto-tuning and Manual Reset

Manages auto-tuning process and manual reset for offset correction.

Parameter Group 2 Settings

SV Limits, Control Output, and SSR Method

Sets SV limits, control output, and SSR drive output methods.

Alarm, LBA, Digital Input, and Lock Configuration

Functions

Alarm Operation Modes

Alarm Option Settings

Loop Break Alarm (LBA) Details

LBA Monitoring and Detection Parameters

SSR Drive Output Function (SSRP)

SSRP Control Mode Selection

Control Mode Explanations

ON/OFF, Cycle, and Phase Control

Auto Tuning and Input Settings

Control Method and Hysteresis

Covers control method selection and hysteresis settings for ON/OFF control.

Advanced Control Functions

Manual Reset and Sensor Break Output

Output Connections and Usage