12
●
MAINTENANCE SERVICE
Our products are made of long-lasting and durable
materials, and we insist on perfect production process.
Each product leaves the factory after 35 procedures and
12 times of testing and inspection work, which ensures that
each product has excellent quality and performance.
●
●
●
●
●
●
Be careful not to rub the product against rough surfaces or
wear the product, especially the sheet metal housing.
Please regularly check the product parts that need to be
tightened and connected. If found loose, please tighten it in
time to ensure the safe operation of the equipment. The
external and internal parts of the equipment in contact with
various chemical media should be frequently treated with
anti-corrosion treatment such as rust removal and painting
to improve the corrosion resistance of the equipment and
extend its service life.
Comply with the safe operating procedures and do not
overload the equipment. The safety guards of the products
are complete and reliable.
Unsafe factors are to be eliminated in time. The circuit part
should be checked thoroughly and the aging wires should
be replaced in time.
Regularly clean and replace consumable parts such as oil
pump and oil filter; adjust the clearance of various parts
and replace worn (broken) parts. Avoid contact with
corrosive liquids.
When not in use, please store the product in a dry place.
Do not store the product in hot, humid, or non-ventilated
places.
To maintain the performance and appearance of the product,
it is recommended that the following product care guidelines
be read carefully：
Maintenance
To Next Page
Loading...
