Need help?Do you have a question about the Autool BT 260 and is the answer not in the manual?
General| Brand | Autool |
|---|---|
| Model | BT 260 |
| Category | Test Equipment |
| Language | English |
Contacts the circuit or component to be tested.
Illuminates dark work areas or work areas at night.
Identifies positive, negative, or contacting a positive circuit.
Indicates test results.
Resets the tool when the Circuit Breaker is tripped.
Conducts battery current to the tip for activating electrical components.
Tests voltage and polarity in DC Voltage mode using the probe tip.
Tests continuity on wires and components using resistance mode.
Verifies diagnostic trouble codes by testing sensor circuits.
Checks trailer lights and connector function using DC Voltage mode.
Tests component functions by activating them directly in hand.
Tests component functions by activating them while installed in a vehicle.
Confirms computer and airbag safety of the tool.
Explains troubleshooting for lack of power at the tip.
Step-by-step guide for replacing the power switch on the tool.
Details the terms and conditions of the product warranty.
Provides guidance on how to get service or repairs for the tool.
To Next Page
