EasyManua.ls Logo

Autool LM160 User Manual

Autool LM160
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.autooltech.com
Smart Digital Manifold Kit
AUTOOL LM160
User Manual
户手

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Autool LM160 and is the answer not in the manual?

Autool LM160 Specifications

General IconGeneral
DisplayLCD
RefrigerantR134a, R22, R404a, R407c
Pressure Range-0.1~5.0MPa
Temperature Range-40 to 150 °C
Temperature Resolution0.1 °C

Summary

COPYRIGHT INFORMATION

Copyright

Details about copyright and usage restrictions for the manual.

Trademark

Information regarding trademarks and their usage.

SAFETY AND ENVIRONMENT

About this Manual

Provides guidance on how to use the manual.

Safety Rules

Outlines essential safety precautions for operating the instrument.

Environmental protection

Details on responsible disposal and environmental impact.

TECHNICAL SPECIFICATIONS

Use

Specifies the intended use and environmental limitations of the instrument.

Technical data

Lists detailed technical parameters and specifications of the device.

PRODUCT DESCRIPTION

Structure diagram

Illustrates the physical components and layout of the instrument.

INITIAL OPERATION

Steps to install the battery

Step-by-step guide for installing the instrument's battery.

Start instrument, main interface introduction

Instructions on powering on the instrument and navigating the main interface.

Introduction to the setting interface

Guide to accessing and using the instrument's settings menu.

Introduction to the parameter setting

Explains how to adjust and set various instrument parameters.

Valve precautions

Important safety and operational guidelines for using the instrument's valves.

PRODUCT USAGE

Connect the clamp-shaped temperature probe

Instructions for connecting the temperature probe for accurate readings.

Start the instrument

Details on how to properly start the instrument for measurement.

Select the refrigeration mode

Guide on selecting the correct refrigerant mode for operation.

Select the pressure leak test mode

How to use the pressure leak test function for system integrity checks.

Select the vacuuming mode

Steps to perform vacuuming operations for the refrigeration system.

Precautions and combination

Important considerations and display combinations for various measurement scenarios.

PRODUCT MAINTENANCE

Clean the instrument

Procedures for cleaning and maintaining the instrument's exterior.

Ensure measurement accuracy

Methods to ensure the accuracy and reliability of measurements.

Replace the battery

Instructions on how to safely replace the instrument's battery.

WARRANTY

Warranty access

Information on how to access warranty services and claims.

Disclaimer

Legal disclaimers regarding manual content and product usage.

RETURN & EXCHANGE SERVICE

Return & Exchange

Policy and procedures for returning or exchanging AUTOOL products.

MAINTENANCE SERVICE

Maintenance

Guidelines for product care to maintain performance and appearance.

Related product manuals