Display
Start pressure
Current pressure Measure the equipment pressure.
Pressure
difference
Description
Based on the selected pressure units:
Start pressure shows initial pressure (without
connecting any equipment).
The current pressure minus the starting
pressure is the measured pressure value.
15
Press【 】to convert the pressure unit.
Pressurize to the required test pressure.
Press【 】to start the pressure leak test, and the timing
starts.
The interface displays the time, start pressure, current
pressure and pressure difference.
Press【 】again to stop the pressure leak test (the
relevant pressure value stops updating), and the timing
stops.
Press【 】for the third time, clear the current value, and
restart the test.
Press【 】to exit the pressure leak test mode and return
to the main interface.
Units cannot be switched during the measurement process.
WARNING
3 -
4 -
5 -
6 -
7 -
8 -
9 -
Start
Time 00:01
Pressure Leak Test
Start P: 00:00
Current P: 00:00
Delta P: 00:00
To Next Page
Loading...
