SYSTEM OPERATIONS:
WARNINGS:
As with any product that performs automatic functions, there are certain safety
precautions that you must practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is corrected.
8. The use and operations of this system is the sole responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running
on public streets.
10. THIS DEVISE CANNOT BE USED IN ANY STANDARD TRANSMISSION
VEHICLE. FOR AUTOMATIC TRANSMISSIONS ONLY!
Standard XT-33, 5 Button remote
XT-33
Transmitter
Button
System Function Remark
Lock Doors
Unlock Doors
Trunk Release (Channel 3) Press and Hold for 2 seconds
+
Activate The Remote Start Push twice to start
Stop remote start operation Push to stop engine
II
Switching code For 2nd Car
Operation.
For regular remote transmitter
Only
Standard XT-11 Mini One Button remote
XT-11
Transmitter
Button
System Function Remark
+
Activate or Turn Off The Remote
Start
Push twice to start and stop
To Next Page
Loading...
