Do you have a question about the Autostart AS-1200 SH and is the answer not in the manual?
Lists the components included in the remote engine starter kit for installation.
Provides essential guidelines and precautions for safely installing the system.
Details the capabilities and functionalities of the AUTOSTART system.
Describes available system options and customizable programming settings.
Procedure for programming transmitters to the AUTOSTART unit.
Enables controlling multiple vehicles with a single transmitter.
Methods for fine-tuning the system's tach signal for reliable starting.
Manual process for adjusting tach signal settings.
Guides on accessing and configuring system settings via programming menus.
Configures door lock behavior for starter kill arming.
Details functions and options available in programming mode 1.
Details functions and options available in programming mode 2.
Enables system operation using a vacuum switch.
Safety feature to protect vehicle starter from excessive cranking.
Allows remote starting of an already running vehicle.
Specific input requirements for diesel vehicle compatibility.
Procedure to erase transmitter codes and restore factory defaults.
Feature for vehicles with integrated security systems for lock/unlock.
Overview of the pin assignments and functions for system harnesses.
Detailed pinout and connection description for the 7-pin harness.
Detailed pinout and connection description for the 4-pin harness.
Detailed pinout and connection description for the 5-pin harness.
Interpretation of system status indicated by parking light flashes.
Visual representation and explanation of system wiring connections.
| Confirmation | Audible and visual |
|---|---|
| Remote Start | Yes |
| Keyless Entry | Yes |
| Trunk Release | Yes |
| Panic Mode | Yes |
| Operating Range | Up to 3000 feet |
| Compatibility | Most vehicles |
| Battery Life | 1 year |



Loading...