EasyManua.ls Logo

Autostart ASRS-3520 - User Manual

Autostart ASRS-3520
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
510-10573 5/19/2017 PM
ASRS-3520 / ASDS-3520 Transmitter Pairing with a DS4+
STEP 1: TRANSMITTER PAIRING PROCEDURE
A. Press and hold the transmitters AUX” button until the remote emits a long beep.
Release the “AUX” button.
B.
ASRS-3520
ASDS-3520
Proceed to step C.
Press and release the START button.
LOCK and TRUNK buttons will illuminate.
C. The remote is now in Pairing mode for a maximum of 20 seconds.
STEP 2: VEHICLE PAIRING PROCEDURE
A. Turn Ignition ON with the key.
B. Press, release, then press and hold the Antenna button until the antenna LED
flashes once. Release the button. The DS4+ system is now in Pairing mode.
C. Press the transmitters LOCK button. The horn/siren will sound and the remote will
play a melody to indicate the system has learned the remote ID, then it will exit out
of Pairing mode after a successful pairing attempt.
D. If pairing fails, wait for 30 seconds then repeat step 1.
STEP 3: EXITING PAIRING MODE
A. Once pairing is complete, turn ignition OFF. The horn/siren will sound to confirm
exiting.
Jumelage de la télécommande ASRS-3520 / ASDS-3520 à un DS4+
ÉTAPE 1 : PROCÉDURE DE JUMELAGE DE LA TÉLÉCOMMANDE
A. Appuyez et maintenez le bouton « AUX » de la télécommande jusquà celle-ci
émette une longue tonalité. Relâchez le bouton « AUX ».
B.
ASRS-3520
ASDS-3520
Passez à létape C.
Appuyez et relâchez le bouton DÉMARRAGE.
Les boutons VERROUILLAGE et COFFRE s’allument.
C. La télécommande est maintenant en mode Jumelage pendant un maximum de
20 secondes.
ÉTAPE 2 : PROCÉDURE DE JUMELAGE DU VÉHICULE
A. Mettre le contact avec la clé.
B. Appuyez, relâchez, puis appuyez et maintenez le bouton dantenne jusquà ce que
le voyant de lantenne clignote. Le système DS4+ est maintenant en mode
Jumelage.
C. Appuyez sur le bouton VERROUILLAGE de la télécommande. Le klaxon/sirène et la
télécommande jouent une mélodie pour indiquer que le système a appris lID de la
télécommande, et le système quitte le mode Jumelage après avoir réussi.
D. Si le jumelage échoue, attendez 30 secondes et répétez létape 1.
ÉTAPE 3 : SORTIE DU MODE JUMELAGE
A. Une fois le jumelage terminé, coupez le contact. Le klaxon/sirène retentit pour
confirmer la sortie.
Question and Answer IconNeed help?

Do you have a question about the Autostart ASRS-3520 and is the answer not in the manual?

Summary

ASRS-3520; ASDS-3520 Transmitter Pairing with DS4+

Transmitter Pairing Procedure

Steps to pair the transmitter with the DS4+ system using specific button presses.

Vehicle Pairing Procedure

Steps to pair the vehicle to the DS4+ system via ignition and antenna button.

Exiting Pairing Mode

Instructions on how to correctly exit the pairing mode after completion.

ASRS-3520; ASDS-3520 Transmitter Pairing with XL202

Antenna Pairing Procedure

Procedure to pair the antenna with the XL202 system by pressing the antenna button.

Transmitter Pairing Procedure

Steps to pair the transmitter with the XL202 system via the AUX button.

Pairing Procedure

Steps for regular or Car 2 transmitter pairing with the XL202 system.

XL202 Learning Procedure

Procedure for the XL202 module to learn the remote ID after pairing.

Autostart ASRS-3520 Specifications

General IconGeneral
BrandAutostart
ModelASRS-3520
CategoryRemote Starter
LanguageEnglish

Related product manuals