4
1 General instructions and operating principle
The AUTOTERM AIR heaters are designed to be used:
• for heating of various confined spaces, of vehicles for example driver’s cabin
or cargo compartment of vans or trucks at ambient temperatures up to -45°C.;
• for heating cabins, cargo compartments and other various confined spaces of
maritime transport;
The heater operates independently of the vehicle engine.
Heaters built-in fan draws air through the air intake opening. The air heated by the
heater is channelled to cabins and desired spaces via outlet channels.
Fuel is supplied by a separate fuel pump from the fuel tank of the vehicle or vessel or
from an additional fuel tank.
The heater can be powered by a battery of the vehicle or a separate battery.
Temperature in rooms can be regulated by using a temperature sensor and a control
panel, which sets heating parameters.
When a temperature sensor is present (either built in to the control panel or additionally
installed), the heater is constantly comparing the actual temperature with the set temperature
and automatically adjusts the heating capacity according to the heat demand
Installation of the heater and its components must be carried out by
specialized organizations approved by AUTOTERM. Installation of the
heater must be carried out only by certified specialists in accordance
with the installation instructions.
If the heater is handled and/or installed improperly, there is a possibility
of a fire hazard and damage of property because fuel and electrical
components are being used. That is why all safety precautions and
installation instructions must be observed.
To Next Page
Loading...
