8
3.1 Installation of the heater
Install the heater, taking into consideration permissible operating position according
to Fig.1a/b. Take into account the possible heel of the vessel, if installing on a maritime
transport.
When heater is positioned with exhaust pipe facing downwards and air inlet facing
towards you, it is considered 0° position. AIR-2D and AIR-4D can be tilted everything
between 0 and 90°. From the same point of view, wires on the 2D and 4D must remain on
the right side or on the top of the heater. The AIR-8D and AIR-9D should not be tilted
(see Fig.1a).
WARNING!!! Reliable operation of the heater depends on correct
installation of the heater. The heater must be installed horizontally
(according to Fig.1a).
To Next Page
Loading...
