Autronica AUTROSAFE 4 Brochure

10
n
inTEgRATEd 3Rd PARTy inTERFAcE
– granting unlimited communication options
AutroSafe 4 communicates with equipment using the following protocols
■
ESPA 4.4.4 – allowing connectivity with devices such as AutroTel alarm routing
via telephone networks and pocket paging systems
■
NMEA-0183 – allowing connectivity with devices such as the maritime
Voyage Data Recorder (VDR)
■
MODBUS – allowing connectivity with Programmable Logic Controllers (PLC)
■
AutroCom – allowing interface to control and monitoring systems (AutroMaster)
AutroSafe 4 includes the following communication ports
■
2 Ethernet ports for AutroNet, AutroCom and conguration data/system software upgrade
■
1 AL_Com+ port (interfacing loop drivers and I/O units)
■
1 RS-232, RS-422 or RS-485 (AutroCom/ESPA4.4.4/MODBUS/VDR)
■
1 AutroFieldBus interface
■
2 USB host ports for printer/USB memory stick
(conguration data and system software upgrade)
■
FailSafe relay output
clEAn dESign And PERFORmAncE
– balancing intuitive user interface with high technology
During normal operation, the power indicator will always display a steady
green light when the power is ON. No disrupting or unnecessary
information is shown, only indicators relevant to the actual condition
are visible.
imPROvEd FlExibiliTy
– adjustable to any environment
You can change multi detector operation class, adjust a single detector
or a group of detectors or operate class switch for a period of time.
PROvEn lOOP UniTS
– a wide range for any application
All types and series of AutroSafe detectors, manual call points, I/O units
and sounders can operate on the same detection loop.

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English