Autronica AUTROSAFE 4 Brochure

FROm SEcURE TO dOUblE SEcURE
– introducing AutroKeepers that provide dual reporting of events
AutroSafe 4 provides the highest degree
of security yet by combining safety,
reliability and availability.
At the basic level, the sensor units are
connected in two-wired loops. Consequently,
in case of a single broken or shorted loop,
connection with all units is maintained.
Additionally, two AutroKeeper (patent pending)
units per loop make redundant control of the
loop possible. This is particularly important
since, should the primary loop controlling
panel fail or misbehave, the secondary
backup panel will take control of the loop.
AutroKeepers are smart relay units that
are connected to the loop, controlling a
panel’s access to it. They may operate
in automatic, semi automatic or manual
modes. The AutroKeeper makes it possible
to communicate with loop units, using a
secondary panel in addition to the primary
one. This ensures that an alarm event is not
lost in case of system node or network failure.
AutroSafe 4 is certied according to
European directives (CPD) requiring
EN 54 compliance.
Built to deliver a higher degree of safety
■ All loop units have a short-circuit isolator – no need for extra loop units
■ Loops are powered from both sides – ensuring redundant loop network
■ AutroSafe SelfVerify
®
monitors each detector and manual call point every day
■ Two Autrokeepers ensure that no events are lost in case of system node or network failure
■ Dual network between all panels secures redundant panel network
■ Dual connections to system integrators
n
5

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English