AUX Link car adapter for iPod, iPhone, iPad USER MANUAL
AUX Car Kits http://auxcarkits.com/
Copying or reprinting of this material without reference to the original source and reciprocal links are strictly prohibited
To select the desired playlist you should press DISC UP (+) or DISC DOWN (-). After
the selected playlist begins playing, the playlist number and the track number will be
displayed on the car stereo screen. In some cases, it may take a few seconds till the
synchronization is finished. When the last song in the playlist is over, the playback
continues from the first track in the current playlist.
6.6 PLAYBACK FUNCTION CONTROLS
The playback can be controlled with several functions:
SCAN
In order to play each track in the playlist for 10 seconds, press the “Scan” button on
the car stereo.
Random (Shuffle)
In order to play tracks from the current playlist in random order, press the "RDM"
random button (in some models this button is called "P scan").
Repeat
In order to repeat the playback of a current track, press the "Repeat" button.
NOTE: While SCAN, RANDOM and REPEAT functions are supported in the Playlist
Mode, in the Hybrid Mode they might be unavailable.
Track Up/Down
In order to switch to the next song in the playlist, press the "NEXT" button. To go to
the beginning of the track that is currently played, press the "PREV" button. To go to the
previous song in the playlist, press twice the “Track down” button. In case your OEM car
stereo supports the maximum of two digits for numbers of tracks, the track number 100
will be shown as 01, the track number 101 as 02, etc.
Fast Forward and Rewind
In order to seek within a single song, press the “Fast Forward” or “Fast Reverse”
button. Your new position within the song will be seen on the screen timer. Though this
To Next Page
Loading...
Need help?
General