Application
videos (two 4K@60Hz maximum) at the
same time.
Note: The connected computer needs to
support DP 1.4a standard and MST output
to outputting two 4K@60Hz video
channels.
Supports PD 2.0. The port can charge the
connected laptop (up to 100W) when the
Charging port is connected to the external
power source.
The following cable is recommended:
USB type-C to type-C cable (USB 3.2 Gen 2 or
Application
Warnings:
Before wiring, disconnect the power from all devices.
During wiring, connect and disconnect the cables gently.
When select USB-C In laptop as input source, monitor A and B output
the signals from USB-C’s MST dual-screen. All peripherals including all
USB devices, headphone (the PC needs to select the “USB Audio
Device”), and SDXC card will be connected to the laptop connected.
When select Desktop 2 as input source, monitor A and B output the
signals from DP input and HDMI input respectively. All peripherals
including all USB devices, headphone (the PC needs to select the “USB
Audio Device”), and SD card will be connected to the host PC Desktop 2
connected.
When charging the connected laptop through USB-C In port, users need
to connect an external power source (up to 100W) through the
Charging port.
Regardless of whether USB-C In is selected as the input source, the
laptop connected to this port can access the network the LAN port
connected. The PC connected with Desktop 2 group doesn’t support
this function.
To Next Page
Loading...