AV Now STUDIOMASTER C2S-2 User Manual

VIRTUAL INSTRUCTION STREAMING SOLUTIONS
USER GUIDE FOR THE
STUDIOMASTER C2S-2 MIXER
This guide walks you through setting up a C2S-2 mixer for video recording and
streaming voice-over-music tness instruction with a computer or smart device.
CONTACT US TODAY FOR SOUND ADVICE! | 800-491-6874 | SALES@AVNOW.COM | AVNOW.COM

AV Now STUDIOMASTER C2S-2 Specifications

General

Channels	2
Driver Size	50 mm
Impedance	32 Ohms
Foldable	Yes
Type	Headphones
Frequency Response	20Hz - 20kHz
Cable Length	3 m
Connector	3.5mm with 6.3mm adapter

Summary

User Guide for the Studiomaster C2S-2 Mixer

Cable Connection Information

Microphone Receiver Connection

Connect your microphone receiver to channel one using an XLR or 1/4" cable.

Music Player Connection

Connect your music player to channel 3/4 (recommended) or channel 2 using specified cables.

Auxiliary Sound to Speakers

Connect the AUX SEND to speakers for instructor reference, using 3.5mm or RCA cables.

Information on Knob Settings

Knob Functions and Ideal Settings

Details the function of LEVEL, GAIN, and MAIN MIX knobs for microphone and music levels.

Auxiliary Send Knob Functions

Explains how AUX PRE and AUX SEND knobs control sound to room speakers for instructor reference.

Computer and Software Setup

Selecting Mixer as Input Device

Configure Windows or Mac sound settings to use the mixer's USB audio codec as the input.

Managing Output Devices

Ensure built-in speakers are not disabled by selecting the correct output device in sound settings.