Join the orange and grey revolution
AVA 200 Series Overview
The AVA Basic is an entry level electric actuator designed where only minimal
features are required for on-o applicaons. The basic version is constructed tradionally
with internal cams striking micro-switches to stop the reversible motor in the required
posions. The lower torque models are available failsafe using capacitors.
● Fully weatherproof to IP67 ● Dome style local visual indicator ● Hand operaon
● End of travel conrmaon switches ● Female octagon drive output
● Mulple ISO5211 mounngs ● An-condensaon heater
The AVA Smart
is a truly smart electric actuator designed to cover a wide range of funconal
applicaons, is fully electronic using digital magnec posioning and enrely run by
rmware. The smart version is recognisable by the introducon of a bright OLED screen
and external push buons that are used to set and adjust the AVA Smart actuator.
Available in ON OFF, Modulang, Failsafe, Failsafe Modulang, Timer, Wireless and
BUS. Standard features include:
● OLED Screen ● User friendly local buon controls ● Brushless motors
● An-condensaon heater ● Electronic torque limiter ● Many funconal opons
Standard Specicaons 200Nm
B200 Basic S200 Smart
Max Rated torque Nm output (in.lbs) Run 200Nm (1770) / 240Nm Break (2124) Run 200Nm (1770) / 240Nm Break (2124)
Voltage range 12VDC, 24VAC/DC, 95-265VAC 12VDC, 24VAC/DC, 95-265VAC
Mounng (ISO5211) x drive (female octagon) F07 & F10 x 22mm F07 & F10 x 22mm
Ingress Protecon IP67 IP67
Electrical connecon Conduit Wiring Box: 2 x M20 Conduit Wiring Box: 2 x M20
End of travel conrmaon (dry contact/volt-free) 2 x Mechanical micro-switches 2 x Electronic relays
Local visual posion indicator Dome style Dome style
LED Status light LED open/close/fault LED open/close/fault
Housing material ABS ABS
Weight ABS 6.0Kg 6.0Kg
Revision: 002 Date: 05/06/20
Dimensions:
Note that our smart actuator and basic actuators, regardless of funcon are all the same sizes per series.
To Next Page
Need help?
General
