EasyManuals Logo

Ava 200 Series User Manual

Ava 200 Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Join the orange and grey revolution
POWER CONSUMPTION FOR SERIES 200 ACTUATORS
Rated Voltage 95-265VAC/DC (50/60Hz) 24VAC/DC (50/60Hz) DC12V
Voltage Range AC: 95-265V DC: 100-300V AC: 18-26V DC: 22-28V 10-15V
200 Series Torque Nm (Break) 200 (240) 200 (240) 200 (240)
200 Series Power (W) All Series 120W 120W 120W
200 Series Power (W) Failsafe 150W 150W 150W
200 Series Peak Current 0.8A 7.5A 7.5A
200 Series Idle Current 0.01A 0.12A 0.12A
200 Series Fuse 4A 10A 10A
200 Series Run me 25 Seconds Open - Close 25 Seconds Open - Close 25 Seconds Open - Close
200 Series Heater Power (W) 2W 2W 2W
STANDARD FEATURES:
Operang frequency Not connuous, allow ≥ 1 minute between cycles
Posion conrmaon Mechanically driven dome style visual 2 colour indicator
Mounng restricon Do not install underslung/upside down. Can install upright horizontally or vercally.
End Posion indicaon Micro-switches operated by adjustable internal cams , set slightly ahead of the nal motor stop posion.
ISO:5211 F07 & F10
Working Angle Factory set at 90±2⁰, maximum angle of rotaon 360unless mul turn series.
Manual operaon Yes, by hexagonal wrench (supplied in clip) when no power is being applied. Must engage declutch buon on cover rst.
Declutch Buon on Cover This buon once pressed in allows easy use of manual override, press in again to disengage and allow electric control.
Female drive 22mm x 27mm deep
Ingress protecon IP67
Max media temp 80C
LED Light Green shows actuator OPEN - Red shows actuator is CLOSED - Blue shows actuator as ALERT , see wiring diagram
Ambient temp -20 to +60C (ABS) Non-operang temp ; -40C to ≥80C
Wiring Connecvity 2 x M20 1.5 conduit gland in wiring box. Remove wiring box to expose wiring terminal strip. See wiring diagram.
Ambient humidity 5-95% RH non-condensing
Explosion proof No, prohibited. Do not use in hazardous areas
Housing Plasc (ABS)
Weight With standard ABS housing 6Kg.
Warranty Basic Series Basic series carries standard 1 year 20,000 operaons warranty. Terms and condions apply.
Warranty Smart Series Smart series carries upgraded 2 year 60,000 operaons warranty. Terms and condions apply.
AVA 200 Series Specification
Item Material Parts
1 ABS Actuator
2 Transparent AS Indicator
3 Screw x 10 304
4 Manual Sha 304
5 Oil Seat NBR
6 Label PVC
7 Wrench Fixed ABS
8 Hexagon Wrench Steel
9 Weatherproof Cable connector Nylon
10 Cover Seal NBR
1
2
3
4
6
7
8
9
10
Revision: 002 Date: 05/06/20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ava 200 Series and is the answer not in the manual?

Ava 200 Series Specifications

General IconGeneral
BrandAva
Model200 Series
CategoryController
LanguageEnglish

Related product manuals